Extractor Tool 0.062 inch

There’s no way on earth to remove a round pin (male or female
crimp terminal) from its housing without destroying it, the
housing, or your hands — unless you use this tool.

It pushes the pin's locking tabs back to allow clean removal of
the pin. The larger .093 inch diameter pin tool is the most
commonly used on all pinball machines, while the smaller .062"
pin tool is useful on early Williams solid state harness
connectors.

Removes 1.57 mm (.062 inch) diameter series pin and socket male
and female terminals in both plugs and receptacles.

Reference:

• Stern 000-0310-00
  
• W-HT-2032-P