Pushbutton LED Kit - multicolor

New illuminated flipper pushbutton kit for late model Stern
pinball machines.

Fits all Stern pinball machines made from 1999 to present.

No soldering needed.

Reference:

• 520-PBLED-M Kit includes:
  
• 2 blue LED circuit boards with wire harnesses and connectors
  
• 2 clear flipper pushbuttons
  

Tools required for installation: 1/4" nut driver, pliers.

Installation Instructions

1. Turn off power to pinball machine.

2. Remove playfield glass and raise playfield and secure it
safely.

3. Access the pal nuts that secure the left and right side
flipper pushbuttons.

4. With the nut driver, remove the locking screws and washers
that secure the pal nuts. With pliers, remove the pal nuts and
old pushbuttons. Save the pal nuts for use with the new clear
pushbuttons and LED boards.

5. With the nut driver, remove one of the 2 screws that hold the
flipper leaf switches to the cabinet. Loosen the other screw and
swivel the flipper leaf switch out of the way.

4. Insert the new clear pushbuttons into the cabinet and attach
circuit boards to pushbutton shafts. The LED's face the inside of
the cabinet.

5. Secure the pushbutton and circuit board with the pal nut. You
may bend the LED's up for easier access to the pal nut. Do not
over-tighten the nut. Re-adjust the LED positions.

6. Plug the LED circuit board connector into the unused 12v power
plug beneath the shooter rod.

7. Turn the game on and test for LED operation.

8. Reassemble playfield and glass.