NEW BriteRings™ Pop Bumper LED Lighting

 Brilliant Colors – Easy to Install – Affordable – Compatible

BriteRings use new and improved technology; now with 30 micro-LEDs on the top side to provide very uniform lighting.  The bottom side uses 10 natural white LEDs to provide proper color and illumination of your playfield.  Just choose a color and glue these LED rings into your existing or new pop bumper caps (select color from the drop-down menu above).  BriteRings have fully adjustable brightness and LEDs last for years; using significantly less power and heat as compared to incandescent bulbs.

Note:  not recommended where partially cut pop bumper caps are required on specific games.  Compatible with any Stern, Williams-Bally, Data East, or Sega pop bumper that uses the standard body (03-7443-5) and a #555 wedge lamp.  No permanent alterations to your machine.  Simply replace your pop bumper light bulb with this kit using your current pop bumper cap.

Check out the video installation demo by clicking here:
https://www.youtube.com/watch?v=SNWKc4yRUvw

Power consumption comparative to an ordinary incandescent bulb:
Incandescent #555 lamp ~ 0.25 amps @ 6.3v  AC/DC
BriteRing™ on FULL POWER ~ 0.17 amps @ 6.3v  AC/DC

Values provided are based on white lighting.  Slight differences may be found between incandescent lamps and different LED colors.  Results are also subject to specific machines.
Another brilliant light accessory from BriteMods!