This Pinball Life LCD Display Assembly comes complete with LCD Bracket, LCD Screen, and LCD controller board. This display is targeted for the DIY/Homebrew/OEM pinball manufacturers and will connect to any PC using either DVI, VGA, or HDMI.

Assembly Technical Specifications:

• Signal Input: DVI, VGA, HDMI


• Resolution: up to 1366x768


• Power Input: 12vdc through DC Jack on controller board (power adapter not included)


• Standard pinball mounting holes

Physical Specificaitons:

• Bracket Width: 15.55 inches


• Bracket Height: 8.31 inches


• Assembly Depth: 1.33 inches (with boards)

• Screen Size: 15.6” diagonal 


• Pixel Number: 1366 x R.G.B. x 768 pixels 


• Pixel Pitch: 0.17925 (H) x 0.17925 (V) mm 


• Pixel Arrangement: RGB vertical stripe 


• Display Colors color: 262,144 colors 


• Transmissive Mode: Normally white 


• Surface Treatment: Hard coating (3H)


• Luminance: White LED


• Contrast Ratio: 600 


• Viewing Angle (H): +- 70 deg 


• Viewing Angle (V): +- 60 deg 


• Operating Temp: 0 to +50 deg C (+32 to +122 deg F) 


• Storage Temp: -20 to +60 deg C (-4 to +140 deg F)

If you have any further questions regarding this display, please contact Scott at [email protected].