Power Tap Board for Williams System 3-11
Ships from US and is sold by Pinball Life$9.95
12 volt power tap for Williams System 3 through System 11C games.
This power tap provides up to 2 amps of 12v power into a standard 3-pin .093 Molex plug to power your mods.
This power tap provides up to 2 amps of 12v power into a standard 3-pin .093 Molex plug to power your mods.
Installation:
Power off machine and remove backglass
Unplug wire harness from 1J2 (system 3, 4, 6, 6A, and 7) or 1J17 (system 9 and 11) on the MPU
Plug in power tap to 1J2 (system 3 to 7)/1J17 (system 9 and 11)
Plug in wire harness to the back of 1J2 (system 3 to 7)/1J17 (system 9 and 11)
Connect your mod or power splitter to the Molex connector on the power tap and enjoy