Star post LED kit - red

Star post LED kit - red

Ships from US and is sold by Marco Specialties
$11.95


Star post LED kit - red



#05-8319-R


2 piece 6.3 volt AC playfield star post illumination kit


Make your playfleid lightning pop with this popular game modification. 1-1/16 inch tall plastic star posts are common to late model Stern, Sega, Bally /
Williams and other brand electronic pinball machines.



This kit is designed ONLY for 6 VAC game lightning systems found in Williams, Bally, Data East, Sega, and Stern pinball machines. Will NOT operate in 5 VDC lighting systems from Jersey Jack Pinball, Spooky Pinball, and Dutch Pinball.



Fits neatly under any standard, single bumper ring 03-8319-XX plastic star post. Will not fit under double ring or concentric ring style posts.


Includes 2 LED boards, wiring, and installation instructions.


Reference:


  • 03-8319-XX star posts




INSTALLATION INSTRUCTIONS:


WARNING: Installation requires basic knowledge of electronic circuity and requires soldering. Incorrect installation may damage these boards and/or your pinball machine.


  • 1. Turn OFF power to the machine.
  • 2. Install LED boards beneath desired star posts. They should fit loosely under the plastic post.
  • 3. Position wires close to a playfield hole and avoid ball traffic areas. Feed the wires through hole to underside of playfield.
  • 4. For GENERAL ILLUMINATION of the posts, connect the WHITE and GRAY wires to any nearby general illumination lamp. Posts will light along with all general illumination lamps.
  • 5. To add SWITCHED ILLUMINATION flashing feature, connect the GRAY wire to the minus or negative side of a nearby coil or flash lamp. Posts will flash in sync with coil or lamp activation. This connection will cause the post light to dim slightly.
  • 6. Check all connections and secure excess wire with a cable tie away from moving parts.




    • 4 oz



    View / Buy Item Add to List