HAUNTED HOUSE (Gottlieb) Apron decal

HAUNTED HOUSE (Gottlieb) Apron decal

Ships from US and is sold by Marco Specialties
$39.00


HAUNTED HOUSE (Gottlieb) Apron decal



#E-18793-D


Lower playfield metal apron cardholder decal for the GottliebĀ® HAUNTED HOUSE pinball machine.


Yellow & green printed on clear vinyl.
Repaint apron background in gloss black.


Reference:


  • E-18793 cardholder




    Installation Instructions:


  • After stripping and repainting the metal cardholder apron (use a high quality spray paint), allow the base coat to cure for at least 24 hours.
  • Make sure the surface of the apron is clean - no dust, oil, wax, fingerprints.
  • Position the decal on the apron and mark position with masking tape.
  • Use a spray bottle to wet the apron surface with water and a small amount of dish detergent. This allows re-positioning and air bubble removal before the adhesive is set.
  • Place decal face down and carefully remove adhesive backing. Don't allow dust or dirt to contaminate the adhesive.
  • Apply the decal to the apron surface and adjust position.
  • Lay a piece of paper on top of the decal to prevent squeegee scratches. Squeegee the decal from the center area outward and push air bubbles out to the edges.
  • Allow 24 hours to dry. Fogging of the clear adhesive areas may occur in certain climates but will dissipate in several days.
  • After drying, trim holes as necessary with a hobby knife.




  • 0.5 lb