Stepper motor and connector assembly- Bally / Williams

Stepper motor and connector assembly for use on Bally SCARED
STIFF spider and Bally WHO DUNNIT slot machine features. Comes with connector installed and keyed with no assembly required. Plug and play.

Motor specifications:

• Step Angle (degrees) :1.8
  
• 2 Phase
  
• Rated Voltage : 12V
  
• Rated Current : 0.33A
  
• Holding Torque : 2.3kg*cm
  
• 5mm Diameter Drive Shaft
  
• Winding resistance: 32.6 Ω
  
• Winding inductance: 48 mH
  
• Max flux linkage: 1.8 Vs
  
• Maximum Detent Torque: 0.016 N.M
  
• Total inertia (kg.m.m): 3.5 Kg.m.m
  
• Total friction (kg.m/s): 4 Kg.m/s
  

INSTALLATION NOTES:

Be sure the Molex® connector is properly aligned when connected.

Motor connector pinout:

pin 1 - blue

pin 2 - yellow

pin 3 - n/c

pin 4 - n/c

pin 5 - green

pin 6 - red

Cable length: 12 inches

For Bally SCARED STIFF, if Spider rotates counterclockwise, reverse
the Molex® connector. Spider should spin clockwise.

Reference:

• 14-8024